Shivananda Nayaka H

Designation: 

Professor

Date of Joining at NITK: 

Monday, October 30, 2000

Professional Experience: 

Total 23 Years and at NITK 23 years

Contact Details

E-mail: 

hsn[AT]nitk.edu.in
shivananda[AT]rediffmail.com

Telephone: 

0824-2473665 (O), 0824-2474665 (R)

Mobile: 

+919449591543
Academic Background

Ph.D : IIT Roorkee – 2013
M.Tech : Adv. Mfg. Engg., KREC Surathkal (VTU) – 2000
B. E. : Mechanical Engineering, SJCIT Chikkaballapur (Bangalore University) – 1997

Areas of Interest

• Advanced Manufacturing Engineering
• Severe Plastic Deformation
• Accumulative Roll Bonding
• Processing of Magnesium alloys
* Laser shock peening

Significant Projects

SERB sponsored "Experimental technique to induce surface grain refinement through Laser Shock Penning on ECAP processed Mg alloy", worth 42.02 Lakh Rupees.

Supervision of Ph.D

6 completed:
a. Gopi K R (Reg. No. 145013ME14F04), “Severe Plastic Deformation of Magnesium alloys by Equal Channel Angular Pressing”.
b. Gajanan Anne (Reg. No. 135054ME13FO3), "Development and characteristics if ultrafine grained Mg-Zn/Al Multi layered composites by Accumulative Roll Bonding process”.
c. Vasu M (Reg. No. 155019ME15F15), “Investigation on machinability characteristics of EN47 spring steel using optimization techniques”.
d. Praveen T R (Reg. No. 158014ME1521), “Grain refinement and surface modification technique by equal channel angular pressing and Laser Shock Peening on magnesium alloys”.
e. Ramesh S (Reg. No. 165050ME16F11), “Severe plastic deformation of copper-titanium alloys using multi-axial cryo-forging”.
f. Sachin S (Reg. No. 165010ME16F15), “Investigations on interlaminar fracture toughness of T300/914 composites and severe plastic deformation of C70600 alloy”.

Submitted : 2 (B Srinivasa Rao and Jagadeesha C)

In Progress: 3 (Perla Manoj Kumar, Disha Nayak and Ranganatha)

Significant Publications

INTERNATIONAL JOURNALS
1. Srinivasa Rao Bommisetty, Kanna Babu Chettu, Shivananda Nayaka Hanumanthappa, (2022), “Study and Experimental Investigation of the Effect of Progressive Feed Rate on
Surface roughness in CNC End Milling Process Using RSM”, Journal of International Information and Engineering Technology Association, Vol. 55, No. 5, pp. 581-591.
2. B. Srinivasa Rao, Ch. Kanna Babu and H. Shivananda Nayaka, (2023), “Multi-Response Optimisation of End Milling Process Parameters”, Journal of Mines, Metals and Fuels,
71(1): 29-39.
3. Bommmisetty SrinivasaRao, Ch. KannaBabu, H. ShivanandaNayaka, (2023), “A Novel approach to reduce the temperature rise on cutting tool tip in end milling process”,
Academic Journal of Manufacturing Engineering, 21 (1), 28 – 42.
4. Jagadeesh, C., Nayaka, H.S., Ramesh, S., Praveen, T.R., (2023), “Effect of Multi-Directional Forging on the Evolution of Microstructural and Mechanical Properties of
Lightweight Al-Cu-Li Alloy AA2050”, Journal of Materials Engineering and Performance, (In Press).
5. Ramesh, S., Nayaka, H.S., Anne, G., Arun, M.N., Naik, G.M., (2022), “Investigation of Tribological Characteristics of Cu-Ti Alloys Processed by Multi-Axial Cryo-Forging”,
Metallography, Microstructure, and Analysis, 11 (3), pp. 537-546.
6. Sachin, S., Nayaka, H.S. (2022), “Microstructural Study and Mechanical Characterization of ECAP Processed C70600 Alloy”, Journal of The Institution of Engineers (India):
Series C, 103 (5), pp. 1193-1201.
7. Ramesh, S., Anne, G., Kumar, G., Jagadeesh, C., Nayaka, H.S., (2021), “Influence of Ball Burnishing Process on Equal Channel Angular Pressed Mg-Zn-Si Alloy on the
Evolution of Microstructure and Corrosion Properties”, Silicon, 13 (5), pp. 1549-1560.
8. Ramesh, S., Kumar, G., Jagadeesh, C., Anne, G., Nayaka, H.S. (2021), “Effect of Equal Channel Angular Pressing on Properties Evaluation of Biodegradable Mg-Zn-Mn Alloy”,
Journal of Bio- and Tribo-Corrosion, 7 (2), art. no. 69.
9. Ramesh, S., Anne, G., Bhat, N., Aithal, G., Shivananda Nayaka, H., Arya, S., (2021), “Surface modification of multi-directional forged biodegradable Mg-Zn alloy by ball
burnishing process: Modeling and analysis using deep neural network”, Journal of Manufacturing Processes, 68, pp. 423-434.
10. Aralikatti, S.S., Ravikumar, K.N., Kumar, H., Shivananda Nayaka, H., Sugumaran, V., (2020), “Comparative study on tool fault diagnosis methods using vibration signals and
cutting force signals by machine learning technique”, SDHM Structural Durability and Health Monitoring, 14 (2), pp. 127-145.
11. Ramesh, S., Shivananda Nayaka, H., (2020), “Investigation of Tribological and Corrosion Behavior of Cu-Ti Alloy Processed by Multiaxial Cryoforging”, Journal of Materials
Engineering and Performance, 29 (5), pp. 3287-3296.
12. Ramesh, S., Anne, G., Nayaka, H.S., Sahu, S., Arya, S. (2019), “Effects of combined multiaxial forging and rolling process on microstructure, mechanical properties and
corrosion behavior of a Cu-Ti alloys”, Materials Research Express, 6 (5), art. no. 056559.
13. Ramesh, S., Nayaka, H.S., Gopi, K.R., Sahu, S., (2019), “Effect of multiaxial cryo-forging on microstructure and mechanical properties of a Cu-Ti Alloy”, Materials Research
Express, 6 (2), art. no. 026556.
14. Ramesh, S., Anne, G., Nayaka, H.S., Sahu, S., Ramesh, M.R., (2019), “Influence of Multidirectional Forging on Microstructural, Mechanical, and Corrosion Behavior of Mg-Zn
Alloy”, Journal of Materials Engineering and Performance, 28 (4), pp. 2053-2062.
15. Praveen, T.R., Nayaka, H.S., Swaroop, S., (2019), “Influence of equal channel angular pressing and laser shock peening on fatigue behaviour of AM80 alloy”, Surface and
Coatings Technology, 369, pp. 221-227.
16. Ramesh, S., Anne, G., Nayaka, H.S., Sahu, S., Ramesh, M.R., (2019), “Investigation of dry sliding wear properties of multi-directional forged Mg–Zn alloys”, Journal of
Magnesium and Alloys, 7 (3), pp. 444-455.
17. Ramesh, S., Nayaka, H.S., Sahu, S., Gopi, K.R., Shivaram, M.J., Arya, S., (2019), “Influence of Multiaxial Cryoforging on Microstructural, Mechanical, and Corrosion Properties
of Copper-Titanium Alloy”, Journal of Materials Engineering and Performance, 28 (12), pp. 7629-7641.
18. Mallesha, V., Nayaka, H.S., (2018), “Turning process on EN47 spring steel with different tool nose radii using OFAT approach”, Advances in Modelling and Analysis A, 55 (2),
pp. 43-46.
19. Vasu, M., Shivananda Nayaka, H., (2018), “Investigation of machinability characteristics on EN47 steel for cutting force and tool wear using optimization technique”, Materials
Research Express, 5 (6), art. no. 066501.
20. Gopi, K.R., Nayaka, H.S., Sahu, S., (2018), “Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy”, Arabian Journal for Science and Engineering, 43 (9), pp. 4871-
4878.
21. Praveen, T.R., Gopi, K.R., Nayaka, H.S., (2018), “Numerical Simulation of Shot Peening Process on Equal Channel Angular Pressed Magnesium Alloy”, Silicon, 10 (6), pp.
2463-2472.
22. Sampath, R., Nayaka, H.S., Gopi, K.R., Sahu, S., Kuruveri, U.B., (2018), “Investigation of microstructure and mechanical properties of the Cu-3% Ti alloy processed by
multiaxial cryo-forging”, Journal of Materials Research, 33 (22), pp. 3700-3710.
23. Gopi, K.R., Shivananda Nayaka, H., (2017), “Tribological and corrosion properties of AM70 magnesium alloy processed by equal channel angular pressing”, Journal of
Materials Research, 32 (11), pp. 2153-2160.
24. Gopi, K.R., Shivananda Nayaka, H., Sahu, S., (2017), “Wear Properties of ECAP-Processed AM80 Magnesium Alloy”, Journal of Materials Engineering and Performance, 26
(7), pp. 3399-3409.
25. Gopi, K.R., Shivananda Nayaka, H., Sahu, S., (2017), “Microstructural Evolution and Strengthening of AM90 Magnesium Alloy Processed by ECAP”, Arabian Journal for
Science and Engineering, 42 (11), pp. 4635-4647.
26. Anne, G., Ramesh, M.R., Shivananda Nayaka, H., Arya, S.B., Sahu, S., (2017), “Development and characteristics of accumulative roll bonded Mg-Zn/Ce/Al hybrid composite”,
Journal of Alloys and Compounds, Vol 724, pp 146 – 154.
27. Anne, G., Ramesh, M.R., Shivananda Nayaka, H., Arya, S.B., Sahu, S., (2017), “Microstructure Evolution and Mechanical and Corrosion Behavior of Accumulative Roll Bonded
Mg-2%Zn/Al-7075 Multilayered Composite”, Journal of Materials Engineering and Performance, vol. 26, issue 4, pp 1726 – 1734.
28. Anne, G., Ramesh, M.R., Nayaka, H.S., Arya, S.B., Sahu, S., (2017), "Development and properties evaluation of Mg-6% Zn/Al multilayered composites processed by
accumulative roll bonding”, Journal of Materials Research, Vol 32, issue 12, pp 2249 - 2257.
29. Gopi, K.R., Shivananda Nayaka, H. (2017) “Microstructure and mechanical properties of magnesium alloy processed by equal channel angular pressing (ECAP)”, Materials
Today: Proceedings, Vol 4, issue 9, pp 10288 – 10292.
30. Gopi, K.R., Shivananda Nayaka, H., (2017), "Tribological and corrosion properties of AM70 magnesium alloy processed by equal channel angular pressing”, Journal of
Materials Research, Vol 32, issue 11, pp 2153-2160.
31. Gopi, K.R., Shivananda Nayaka, H., Sahu, S., (2017), “Wear Properties of ECAP-Processed AM80 Magnesium Alloy”, Journal of Materials Engineering and Performance, Vol
26, issue 7, pp 3399 – 3409.
32. Gopi, K.R., Shivananda Nayaka, H., Sahu, S., (2017), “Microstructural Evolution and Strengthening of AM90 Magnesium Alloy Processed by ECAP”, Arabian Journal for
Science and Engineering, Vol 42, issue 11, pp 4635-4647.
33. Gopi, K.R., Nayaka, H.S., Sahu, S., (2016), “Investigation of Microstructure and Mechanical Properties of ECAP-Processed AM Series Magnesium Alloy”, Journal of Materials
Engineering and Performance, 25 (9), pp. 3737-3745.
34. K. R. Gopi, H. Shivananda Nayaka & Sandeep Sahu (2016), "Investigation of Microstructure & Mechanical Properties of ECAP - Processed AM Series Magnesium Alloy",
Journal of Materials Engineering & Performance, Vol 4, issue 9, pp 10288 – 10292.
35. Avvari, M., Narendranath, S., Nayaka, H.S., (2015), “A review on wrought magnesium alloys processed by equal channel angular pressing”, International Journal of Materials
and Product Technology, Vol 51, issue 2, pp 139 – 164.
36. Gajanan Anne, M.R. Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya (2015), "Investigation of microstructure and mechanical properties of Mg-Zn/Al multilayered
composite developed by accumulative roll bonding", Perspectives in Science, http://dx.doi.org/10.1016/j.pisc.2016.04.008.
37. Avvari Muralidhar, S. Narendranath, H. Shivananda Nayaka, (2014), "Effect of Processing Routes on AZ31 Alloy Processed by Severe Plastic Deformation", Procedia Materials
Science, Vol.5, pp. 1560-1566.
38. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, (2013), “Improvement of mechanical properties of FCC & HCP structured materials processed by equal channel
angular pressing”, International Journal of Scientific and Engineering Research (IJSER), Vol. 4(4), pp 570-573.
39. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, (2013), “Equal Channel Angular pressing processing of wrought AZ31 alloy”, International Journal of Advances in
Engineering Sciences, Vol. 3, Issue. 4, pp. 26-30.
40. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, (2013), “Effect of Equal Channel Angular Pressing on AZ31 Wrought Magnesium Alloys”, Journal of Magnesium and
Alloys, 1 (4), pp. 336-340.
41. H.S. Nayaka, G.P. Chaudhari, B.S.S. Daniel, (2012), “Grain growth kinetics of accumulative roll bonded AZ61 alloy”, Advanced Materials Research, Vol. 585, pp 387-391, Trans
Tech Publications, Switzerland.

INTERNATIONAL CONFERENCES

1. Sachin, S., Nayaka, S.H., Santhosh, B., Krishna, P. Experimental investigation of mode I interlaminar fracture toughness in T300/914 composite, (2020) Materials Today:
Proceedings, 21, pp. 1094-1098.
2. Godiganur, V.S., Nayaka, S., Kumar, G.N. Thermal barrier coating for diesel engine application - A review, (2020) Materials Today: Proceedings, 45, pp. 133-137.
3. Gopi, K.R., Shivananda Nayaka, H., Microstructure and mechanical properties of magnesium alloy processed by equal channel angular pressing (ECAP), (2017) Materials
Today: Proceedings, 4 (9), pp. 10288-10292.
4. Vasu, M., Nayaka, H.S., Investigation of Cutting Force Tool Tip Temperature and Surface Roughness during Dry Machining of Spring Steel, (2018) Materials Today:
Proceedings, 5 (2), pp. 7141-7149.
5. Vasu, M., Nayaka, H.S. Comparative study of turning process on EN47 spring steel with different nose radii using statistical technique, (2018) Materials Today: Proceedings, 5
(9), pp. 16893-16903.
6. Ramesh, S., Nayaka, H.S., Gopi, K.R. Influence of Multi Axial Forging (MAF) on Microstructure and Mechanical Properties of Cu-Ti Alloy (2018) Materials Today: Proceedings,
5 (11), pp. 25534-25540.
7. Ramesh, S., Nayaka, H.S., Anne, G., Gopi, K.R., Influence of cold rolling process on microstructure and mechanical properties of Cu-1.5%Ti alloy, (2018) AIP Conference
Proceedings, 1943, art. no. 020055.
8. Anne, G., Ramesh, S., Kumar, G., Sahu, S., Ramesh, M.R., Shivananda Nayaka, H., Arya, S. Development, Characterization, Mechanical and Corrosion Behaviour
Investigation of Multi-Direction Forged Mg–Zn Alloy, (2019) Minerals, Metals and Materials Series, pp. 339-343.
9. Ramesh, S., Shivananda Nayaka, H. Effect of multiaxial cryoforging on wear properties of cu-1.5%ti alloy, (2019) Materials Science Forum, 969 MSF, pp. 392-397.
10. Sachin, S., Nayaka, H.S., Santhosh, B., Krishna, P., Experimental study of Mode i and Mode II interlaminar fracture toughness on aerospace structural composite T300/914,
(2019) AIP Conference Proceedings, 2057, art. no. 020007.
11. Ramesh, S., Anne, G., Naik, G.M., Jagadeesh, C., Nayaka, H.S. Microstructural and mechanical characterisation of Al-Zn-Mg-Cu alloy processed by multi-directional cryo-
forging (2021) Materials Today: Proceedings, 46, pp. 5752-5756.
12. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, “Effect of Processing Routes on AZ31 Alloy Processed by Severe Plastic Deformation", International Conference on
Advances in Manufacturing and Materials Engineering (ICAMME). During March 27-29th, 2014, Venue: NITK, INDIA. Procedia Materials Science 5 (2014) 1560 – 1566
13. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, "Study on grain refinement and mechanical properties of Mg-3%Al-1%Zn processed by equal channel angular
pressing", Minamata International Symposium on Environment and Energy Technology 2013 (MISSION-2013). During 4-6th December, 2013, Venue: Kumamoto University,
Japan.
14. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, “Effect of equal channel angular pressing on microstructure and mechanical properties of Mg-3Al-1Zn alloy”,
International Conference on Engineering Materials and Processes (ICEMAP). During 23-24 May, 2013, Venue: Chennai.
15. Muralidhar Avvari, Narendranath.S, Shivananda Nayaka H, "Improvement of Mechanical Properties of Aluminum processed by severe plastic deformation (SPD) technique",
Fourth International Conference on Recent Advanced in Composite Materials (ICRACM). During 18-21 Feb, 2013, Venue: GOA.
16. H.S. Nayaka, G.P. Chaudhari, B.S.S. Daniel, “Accumulative Roll Bonding of wrought Magnesium alloy”, International conference, Magnesium Technology – 2010, organized by
TMS – 2010, during 20 – 24 February, 2010, held at Seattle, Washington, USA. (2010) Magnesium Technology, pp. 593-597.
17. H.S.Nayaka, G.P. Chaudhari, B.S.S. Daniel, “Accumulative Roll Bonding of wrought Magnesium alloy AZ31”, International Conference, FIME –2010, during 20 – 22 May 2010
held at National Institute of Technology Karnataka Surathkal.
18. H.S.Nayaka, G.P. Chaudhari, B.S.S. Daniel, “Grain growth kinetics of accumulative roll bonded AZ61 alloy”, International Conference on Advances in Materials and
Processing: Challenges and Opportunities (AMPCO 2012), Nov 2 – 4, 2012, IIT Roorkee, India. Advanced Materials Research, 585, pp. 387-391.

Remarks
 

Contact us

Dr. S M Murigendrappa

Professor and Head,

Department of Mechanical Engineering,

National Institute of Technology Karnataka (NITK),

Surathkal

P. O. Srinivasnagar, Mangaluru - 575 025 Karnataka, India.

  • Phone No. (O): +91-0824-2473049

Connect with us

We're on Social Networks. Follow us & get in touch.