Ramesh M R

Designation: 

Associate Professor

Date of Joining at NITK: 

Friday, December 28, 2012

Professional Experience: 

National Institute of Technology Karnataka, Surathkal, Mangalore, Associate Professor, May16, 2018 to Till date
National Institute of Technology Karnataka, Surathkal, Mangalore, Assistant Professor, December 28, 2012 to May16, 2018
M.S.Ramaiah Institute of Technology, Bangalore, Associate Professor, April 19, 2011 to December 29, 2012
Reva Institute of Technology and Management, Bangalore, Assistant Professor, July 17, 2008 to April 16, 2011
Nitte Institute of Technology, Bangalore, Assistant Professor, February 25, 2008 to July 21, 2008
Nitte Institute of Technology, Bangalore, Lecturer, September 18, 2002 to July 24, 2003

Contact Details

E-mail: 

rameshmr [at] nitk.edu.in
ramesdmt [at] gmail.com

Telephone: 

+91 824 2473677

Fax: 

+91 824 2474033

Mobile: 

+91- 094805 40801
Academic Background

• PhD, Indian Institute of Technology Roorkee, Roorkee, 2008
• M.Tech. Manufacturing Science and Engineering, M.S. Ramaiah Institute of Technology, Bangalore, Visveswaraiah Technological University, Belgaum, 2002
• B.E. Mechanical Engineering, Siddaganga Institute of Technology, Tumkur, Bangalore University, 1999

Areas of Interest

Thermal Spray Coatings, Advanced Materials Characterization, Biomaterials, Machining, Wear, Erosion, Oxidation & Hot Corrosion, Severe Plastic Deformation, Castings

Supervision of Ph.D

PhD completed under guidance: 3
1. Jegadeeswaran N. awarded PhD at NITK, Surathkal in the year 2014
2. Somasundar B. awarded PhD at NITK, Surathkal in the year 2015
3. Gajanan Anne awarded PhD at NITK, Surathkal in the year 2017

Significant Publications

Journal Publication

1) Nithin H.S, Vijay Desai and Ramesh M.R, Elevated temperature solid particle erosion behaviour of carbide reinforced CoCrAlY composite coatings, Materials Research Express, 2018, Accepted for publication
2) Pradeep V Badiger,Vijay Desai, M R Ramesh and K Raveendra, Optimization Of Machining Parameters In Turning Process of MDN431 Using Ti-Multilayer Coated Tool, International Journal of Modern Manufacturing Technologies, 2018, Accepted for publication
3) Nithin H.S, Vijay Desai and Ramesh M.R, Cyclic Oxidation and Hot Corrosion Behaviour of Plasma Sprayed
CoCrAlY+WC-Co Coating on Turbine Alloys, Journal of Failure Analysis and Prevention, 2018, Accepted for publication
4) Bhaskar Manne, Harish Thiruvayapati, Srikanth Bontha, Ramesh M R, Mitun Das, Vamsi Krishna Balla, Surface design of Mg-Zn alloy temporary orthopaedic implants: tailoring wettability and biodegradability using laser surface melting, Surface & Coatings Technology 347 (2018) 337–349
5) Nagaraja C. Reddy, B. S. Ajay Kumar, M. R. Ramesh, and Praveennath G. Koppad, Microstructure and Adhesion Strength of Ni3Ti Coating Prepared by Mechanical Alloying and HVOF, Physics of Metals and Metallography, 2018, Vol. 119, No. 5, pp. 462–468.
6) G. K. Manjunath, K. Udaya Bhat, G. V. Preetham Kumar, M. R. Ramesh, Microstructure and Wear Performance of ECAP Processed Cast Al–Zn–Mg Alloys, Trans Indian Inst Met, https://doi.org/10.1007/s12666-018-1328-6
7) Vinay Varghese, M.R. Ramesh and D. Chakradhar, Experimental Investigation And Optmisation Of Machining Parameters For Sustainable Machining, Materials and Manufacturing Processes, https://doi.org/10.1080/10426914.2018.1476760.
8) Ramesh Babu N, Ramesh M R, Kiran Aithal S, Kotgi Kotresh, Effect of Lateral Vibrations during Directional solidification on Mechanical Properties of Al-18%wt Si Alloys, Materials Today: Proceedings 5 (2018) 6954–6962
9) N.D.Prasanna, C.Siddaraju, Gagan Shetty, M.R. Ramesh, Madhusudhan Reddy, Studies on the role of HVOF coatings to combat erosion in turbine alloys, Materials Today: Proceedings 5 (2018) 3130–3136.
10) Vaibhav kumar banka, M.R. Ramesh, Thermal Analysis of a Plasma Sprayed Ceramic Coated Diesel Engine Piston, Transactions of the Indian Institute of Metals, February 2018, Volume 71, Issue 2, pp 319–326
11) Veeresh Nayak C , M R Ramesh , Vijay Desai ,Sudip Kumar Samanta .“Fabrication of stainless steel based composite by metal injection molding” Materials Today: Proceedings 5 (2018) 6805–6814
12) Veeresh Nayak C , M R Ramesh, Vijay Desai, Sudip Kumar Samanta. “Evaluation Of Wear Behaviour Of Metal Injection Moulded Nickel Based Metal Matrix Composite” Silicon – Springer (Accepted ), DOI: 10.1007/s12633-018-9843-y
13) Mahantayya Mathapati, Mrityunjay Doddamani, and M.R. Ramesh, High-Temperature Erosive Behavior of Plasma Sprayed Cr3C2-NiCr/Cenosphere Coating, Journal of Materials Engineering and Performance, 27(4), pp. 1592-1600, 2018
14) Soni, Hargovind; S, Narendranath; M R, Ramesh, "Effects of WEDM process parameters on machined surface of Ti50Ni49Co1 shape memory alloy", Silicon, https://doi.org/10.1007/s12633-017-9687-x, Published online 24 March 2018.
15) Hargovind Soni, Narendranath S, Ramesh M. R., Experimental Investigation on Effects ofWire Electro Discharge Machining of Ti50Ni45Co5 Shape Memory Alloys, Silicon Journal, 2018, Accepted for publication.
16) Hargovind Soni, Narendranath S., Ramesh M. R., ANN and RSM modeling methods for predicting material removal rate and surface roughness during WEDM of Ti50Ni40Co10 shape memory alloy, Advances in Modelling and Analysis A, Vol. 54; No3; pp 435-443, 2018.
17) Nagaraja C. Reddy, B.S. Ajay Kumar, H.N. Reddappa, M.R. Ramesh, Praveennath G. Koppad, S. Kord, HVOF sprayed Ni3Ti and Ni3Ti+(Cr3C2+20NiCr) coatings: Microstructure, microhardness and oxidation behavior, Journal of Alloys and Compounds, Volume 736, 5 March 2018, Pages 236-245.
18) Gajanan Anne, M.R. Ramesh, H. Shivananda Nayaka, Shashi Bhushan Arya, Sandeep Sahu, Development and characteristics of accumulative roll bonded Mg-Zn/ Ce/Al hybrid composite, Journal of Alloys and Compounds, Vol 724, 2017, 146 – 154.
19) Mahantayya Mathapati, M.R. Ramesh, Mrityunjay Doddamani, High temperature erosion behavior of plasma sprayed NiCrAlY/WC-Co/cenosphere coating, Surface and Coatings Technology, Volume 325, 25 September 2017, Pages 98-106
20) Soni, Hargovind; S, Narendranath; M R, Ramesh, An experimental study of influence of wire electro discharge machining parameters on surface integrity of TiNiCo shape memory alloy, Journal of Materials Research, 32(16), 2017,PP3100-3108, https://doi.org/10.1557/jmr.2017.137,
21) Anne, Gajanan; M R, Ramesh; Nayaka, H Shivananda ; Arya, Shashibhushan ; sahu, Sandeep, Development and properties evaluation of Mg-6%Zn/Al multilayered composites processed by accumulative roll bonding, Journal of Materials Research, Volume 32, Issue 12, June 2017, pp. 2249-2257
22) Pratap S. Kulkarni, G. Sharanappa, M. R. Ramesh, N. R. Banapurmath, S. V. Khandal, Experimental investigations of a low heat rejection (LHR) engine powered with Mahua oil methyl ester (MOME) with exhaust gas recirculation (EGR), Biofuels, 2017, http://dx.doi.org/10.1080/17597269.2017.1345356
23) Nithin H.S, Vijay Desai and Ramesh M.R "Elevated Temperature Solid Particle Erosion Performance of Plasma Sprayed Co-based Composite Coatings with Additions of Al2O3 and CeO2" Journal of Materials Engineering and Performance, 26(11), pp. 5251-5261, 2017
24) Gajanan Anne, M R Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Microstructure evolution, mechanical and corrosion behaviour of accumulative roll bonded Mg-2%Zn/Al-7075 multilayered composite, Journal of Materials Engineering and Performance, 2017, Volume 26, Issue 4, 2017, pp 1726–1734.
25) Bhaskar Manne, Srikanth Bontha, Ramesh M.R, Munishamaiah Krishna, Vamsi Krishna Balla, Solid State Amorphization of Mg-Zn-Ca System via Mechanical Alloying and Characterization, Advanced Powder Technology, Advanced Powder Technology, Volume 28, Issue 1, January 2017, Pages 223-229
26) Somasundaram, B., Jegadeeswaran, N., Madhu, G., Ramesh, M.R, Erosion behaviour of HVOF sprayed (CR3C2-35%NICR) +5%Si coatings, (2017) International Journal of Mechanical Engineering and Technology, 8 (8), pp. 1124-1134.
27) M Eswaran, S Athul, P Niraj, G R Reddy, M R Ramesh, Tuned liquid dampers for multi-storey structure: numerical simulation using a partitioned FSI algorithm and experimental validation, Sādhanā, Volume 42, Issue 4, April 2017, pp 449–465.
28) Pradeep V. Badiger, Vijay Desai, M. R. Ramesh, Development and Characterization of Ti/TiC/TiN Coatings by Cathodic Arc Evaporation Technique, Transactions of the Indian Institute of Metals, 70 (9), 2017, pp. 2459-2464.
29) Nithin H.S, Vijay Desai and Ramesh M.R, An investigation on high temperature erosion behaviour of Plasma sprayed CoCrAlY/Al2O3/YSZ on Fe and Ni based alloys, Pertanika Journal of science and technology, Vol. 25, No. 2, Apr 2017, pp 397 – 406.
30) B.R. Bharath Kumar, Mrityunjay Doddamani, Steven E. Zeltmann, Nikhil Gupta, M.R. Ramesh, Seeram Ramakrishna, Processing of cenosphere/HDPE syntactic foams using an industrial scale polymer injection molding machine, Materials and Design, Volume 92, p414–423, 2016
31) Gajanan Anne, M R Ramesh, H Shivananda Nayaka, Shashi Bhushan Arya, Investigation of microstructure and mechanical properties of Mg-Zn/Al multilayered composite developed by accumulative roll bonding, Perspectives in Science, Volume 8, p104—106, 2016
32) B. Somasundaram, Ravikiran Kadoli, M.R. Ramesh and C.S. Ramesh, High temperature corrosion behaviour of HVOF sprayed WC-CrC-Ni coatings, Int. J. Surface Science and Engineering, Int. J. Surface Science and Engineering, Vol. 10, No. 4, 2016, p400-413.
33) N. Jegadeeswaran, K. Udaya Bhat and M. R. Ramesh, Improving Hot Corrosion Resistance of Cobalt Based Superalloy (Superco-605) Using HVOF Sprayed Oxide Alloy Powder Coating, Trans Indian Inst Met, Volume 68, 309–316, 2015
34) B.Somasundaram, Ravikiran Kadoli, M.R.Ramesh, Hot corrosion behaviour of HVOF sprayed (Cr3C2-35% NiCr) + 5% Si coatings in the presence of Na2SO4 - 60% V2O5 at 700ºC, Transactions of the Indian Institute of Metals, April 2015, Volume 68, Issue 2, pp 257-268
35) Hargovind Soni, Narendranath S. and Ramesh M. R.,“Effect of machining parameters on wire electro discharge machining of shape memory alloys analyzed using Grey entropy method” is published in Journal of material science and mechanical Engineering (JMSME) Vol.2, Issue 13 October-December,2015 p-ISSN:2393-9095 e-ISSN: 2393-9109. And presented in the 10th INTERNATIONAL CONFERENCE on “Advances in Mechanical, Material Science, Manufacturing, Automobile, Aerospace Engineering and Applied Physics” (AMAEAP-2015) at J N U New Delhi India on 07 Nov. 2015.
36) B. Somasundaram, Ravikiran Kadoli, and M.R. Ramesh, Evaluation of Cyclic Oxidation and Hot Corrosion Behavior of HVOF-Sprayed WC-Co/NiCrAlY Coating, Journal of Thermal Spray Technology, August 2014, Volume 23, Issue 6, pp 1000-1008
37) Jegadeeswaran, N., Udaya Bhat, K., Ramesh, M.R., Prakarthi, S, Hot corrosion behaviour of HVOF sprayed Stellite-6 coatings on gas turbine alloys. Transactions of Indian Institute of Metals (Springer), Volume 67, Issue 1, p87-93, 2014
38) M.R. Ramesh, S. Prakash, S.K. Nath, Pawan Kumar Sapra, B. Venkataraman, Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings, Wear, Volume 269, p197–205, 2010
39) M.R. Ramesh, S. Prakash, S.K. Nath, Pawan Kumar Sapra, and N. Krishnamurthy, Evaluation of thermocyclic oxidation behavior of HVOF-sprayed NiCrFeSiB coatings on boiler tube steels, Journal of Thermal Spray Technology, Volume 20, Issue 5, p992-1000, 2011
40) N. Krishnamurthy, M. S. Murali, P. G. Mukunda, M. R. Ramesh, Characterization and wear behavior of plasma-sprayed Al2O3and ZrO25CaO coatings on cast iron substrate, J Mater Sci, Volume 45, p850–858, 2010
41) N. Krishnamurthy, M. S. Murali, P. G. Mukunda, M. R. Ramesh, Wear Behavior of Plasma Sprayed Al2O3 Coatings on Cast Iron Substrate, International Journal of Materials Science, Volume 5, Number 2, p157–165, 2010
42) Pawan Kumar Sapra, Surendra Singh, Satya Prakash, M.R. Ramesh, Elevated temperature solid particle erosion performance of Al2O3-3 wt% TiO2 composite coatings, Int. J. Surface Science and Engineering, Volume 4, No. 4/5/6, p360-276, 2010
43) Jegadeeswaran N, Udaya Bhat K, Ramesh M R, Hot Corrosion Studies on As-received and HVOF Sprayed Al2O3+CoCrAlTaY on Ti-31 Alloy in Salt Environment, Procedia Engineering, Volume 64, p1013-1019, 2013
44) N. Jegadeeswaran, M. R. Ramesh, K. Udaya Bhat, Combating Corrosion Degradation of Turbine Materials Using HVOF Sprayed 25% (Cr3C2-25(Ni20Cr)) + NiCrAlY Coating, International Journal of Corrosion, p1-11, 2013
45) B.Somasundaram, Ravikiran Kadoli, M.R. Ramesh, Evaluation of Thermocyclic Oxidation Behavior of HVOF Sprayed (Cr3C2-35% NiCr) + 5% Si Coatings on Boiler Tube Steels, Procedia Materials Science, Volume 5, 2014, Pages 398-407
46) N. Jegadeeswarana, M. R. Ramesh, K. Udaya Bhat, Oxidation Resistance HVOF Sprayed Coating 25% Cr3C2-25(NiCr) + 75%NiCrAlY on Titanium Alloy, Procedia Materials Science, Volume 5, 2014, Pages 11-20
47) S. B. Mishra, Sadhana Sachan, P. K. Mishra, Ramesh M. R, Preparation and characterisation of PPEES-TiO2 composite micro-porous UF membrane for oily water treatment, Procedia Materials Science, Volume 5, 2014, Pages 123-129
48) Nagesh S. N., Siddaraju C, S. V. Prakash, M. R. Ramesh, Characterization of brake pads by variation in composition of friction materials, Procedia Materials Science, Volume 5, 2014, Pages 295-302
49) Shanmukha Priya V, M.R. Ramesh, VPS Naidu, Bearing Health Condition Monitoring: Frequency Domain Analysis, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, Volume.3, 2014, Pages 260-268

Book Chapter

1) Veeresh Nayak C,M R Ramesh,Vijay Desai, Sudip Kumar Samanta, Manjunath Patel G.C, “Optimization of Metal Injection Moulded Process using Taguchi, Grey relational and Principal Component Analysis” book title “Materials Forming, Machining and Post Processing” to be published by Springer Int Publishing, Cham-Switzerland in 2018.. Editor Dr. Kapil Gupta.(Chapter Proposal Accepted )

Remarks

Detailed CV: 

 

Contact us

Dr. Narendranath S, Professor and Head
Department of Mechanical Engineering, NITK, Surathkal
P. O. Srinivasnagar, Mangalore - 575 025
Karnataka, India.

  • Hot line: +91-0824-2473049

Connect with us

We're on Social Networks. Follow us & get in touch.