N. Gnanasekaran

Designation: 

Associate Professor

Date of Joining at NITK: 

Wednesday, August 21, 2013

Professional Experience: 

1. Lecturer SASTRA University 28/06/2006 17/12/2007
2. Senior Project Officer, Centre for industrial consultancy and sponsored research, IIT Madras 21/12/2011 31/03/2012
3. Associate Professor, SSN College of Engineering, Chennai 14/07/2012 12/08/2013
4. Assistant Professor, National Institute of Technology Karnataka, Surathkal 21/08/2013 09/10/2023
5. Associate Professor, National Institute of Technology Karnataka, Surathkal 09/10/2023

Contact Details

E-mail: 

ngs.iitm@gmail.com
gnanasekaran@nitk.edu.in

Telephone: 

+91-824-2474000 Extn. 3674

Mobile: 

9940871337, 8971207881
Academic Background

B.E (Mechanical) - Bharathidasan University, Trichy
M.E (Thermal Engineering) - Government College of Technology, Coimbatore
PhD., (Heat Transfer) - IIT Madras
Postdoctoral fellowship - Federal University of Rio de Janeiro, Brazil

Areas of Interest

Inverse Heat Transfer, Heat Transfer in Metal Foams, Microchannel Heat Transfer, Optimization

Significant Projects

Analytical and numerical investigations of mixed convection through wire mesh porous structure filled in a channel (PI), funded by Science and Engineering Research Board (SERB), (2019-2022). Rs. 21,74,500/-
PIV Set up, MHRD Funding, Rs. 3.8 Crore, 2018.
Design of concentrated solar receiver tube using inverse thermo-elastic analysis for improved efficiency and safe operation of solar power plants (Co-PI), SERB-CRG (2023-2026)
Co-PI, Rs. 26,05,900/-

Supervision of Ph.D

Completed: 6

1. Harsha Kumar M K - 2018, Inverse Techniques for the Estimation of Multiple Parameters using Steady State Heat Transfer Experiments.
2. Banjara Kotresha - 2019, Computational Modelling of Fluid Flow and Heat Transfer Through Metal Foam and Wire Mesh.
3. Vishweshwara PS - 2020, Inverse Estimation of Multi-parameters using Bayesian Framework Combined with Evolutionary Algorithms for Heat Transfer Problems.
4. Palanikumar - 2022, Effect of Sliding Speed and Rise in Temperature at the Contact Interface on Coefficient of Friction During Full Sliding of SS304.
5. Narendran G - 2022, Investigation of Heat Transfer and Fluid Flow in Micro Channels.
6. Prakash H Jadhav - 2023, Numerical and experimental investigations on metal foam porous media.

Thesis submitted - 1

Ongoing - 6

Significant Publications

1. CJ, Thomas Renald, Somasundaram P, Matheswaran M M, N. Gnanasekaran. “Analytical Investigation on Thermo Hydraulic Performance Augmentation of Triangular Duct Solar Air Heater Integrated with Wavy Fins.” International Journal of Green Energy 20, no. 5 (April 09, 2023): 544–54. https://doi.org/10.1080/15435075.2022.2111215. [SCI-Impact factor 3.206].
2. Narendran, Ganesan, N. Gnanasekaran, D. Arumuga Perumal, M. Sreejesh, and H. S. Nagaraja. “Integrated Microchannel Cooling for Densely Packed Electronic Components Using Vanadium Pentaoxide (V2O5)-Xerogel Nanoplatelets-Based Nanofluids.” Journal of Thermal Analysis and Calorimetry 148, no. 6 (January 23, 2023): 2547–65. https://doi.org/10.1007/s10973-022-11925-0. [SCI-Impact factor 4.755].
3. Selvan Nedumaran, Muthamil, and N. Gnanasekaran. “Comprehensive Analysis of Hybrid Heat Sinks with Phase Change Materials for Both Charging and Discharging Cycles.” Heat Transfer Engineering 44, no. 4 (February 21, 2023): 334–52. https://doi.org/10.1080/01457632.2022.2059216. [SCI-Impact factor 2.431].
4. Jadhav, Prakash H., N. Gnanasekaran, and Moghtada Mobedi. “Analysis of Functionally Graded Metal Foams for the Accomplishment of Heat Transfer Enhancement under Partially Filled Condition in a Heat Exchanger.” Energy 263 (January 2023): 125691. https://doi.org/10.1016/j.energy.2022.125691. [SCI-Impact factor 8.857].
5. Narendran, Ganesan, B Mallikarjuna, B K Nagesha, and N. Gnanasekaran. “Experimental Investigation on Additive Manufactured Single and Curved Double Layered Microchannel Heat Sink with Nanofluids.” Heat and Mass Transfer, January 6, 2023. https://doi.org/10.1007/s00231-022-03336-6. [SCI-Impact factor 2.325].
6. P Ganesan, Fathiah Zaib, Tuan Zaharinie, Moghtada Mobedi, N. Gnanasekaran, Thermal resistance of Open-Cell metal foam with thermal interface materials (TIM), Applied Thermal Engineering, Volume 218, 5 January 2023, 119336. https://doi.org/10.1016/j.applthermaleng.2022.119336, [SCI-Impact factor 6.465].
7. Diganjit, Rawal, N. Gnanasekaran, and Moghtada Mobedi. “Numerical Study for Enhancement of Heat Transfer Using Discrete Metal Foam with Varying Thickness and Porosity in Solar Air Heater by LTNE Method.” Energies 15, no. 23 (November 26, 2022): 8952. https://doi.org/10.3390/en15238952. [SCI-Impact factor 3.252].
8. Narendran G, N. Gnanasekaran, Investigation on novel inertial minichannel to mitigate maldistribution induced high temperature zones, Energy Conversion and Management Volume 271, 1 November 2022, 116300. https://doi.org/10.1016/j.enconman.2022.116300 [SCI-Impact factor 11.533].
9. Nedumaran, Muthamil Selvan, N. Gnanasekaran, and Kamel Hooman. “Numerical Analysis of Multiple Phase Change Materials Based Heat Sink with Angled Thermal Conductivity Enhancer.” Journal of Energy Storage 55 (November 2022): 105316. https://doi.org/10.1016/j.est.2022.105316. [SCI-Impact factor 8.907].
10. G Venkatapathy, A Mittal, N. Gnanasekaran, VH Desai, Inverse Estimation of Breast Tumor Size and Location with Numerical Thermal Images of Breast Model Using Machine Learning Models, Heat Transfer Engineering, Oct 2022. https://doi.org/10.1080/01457632.2022.2134081. [SCI-Impact factor 2.431].
11. G., Trilok, Vishweshwara P.S., and N. Gnanasekaran. “Inverse Estimation of Heat Flux under Forced Convection Conjugate Heat Transfer in a Vertical Channel Fully Filled with Metal Foam.” Thermal Science and Engineering Progress 33 (August 2022): 101343. https://doi.org/10.1016/j.tsep.2022.101343. [SCI-Impact factor 4.56]
12. Selvan Nedumaran, Muthamil, and N. Gnanasekaran. “Comprehensive Analysis of Hybrid Heat Sinks with Phase Change Materials for Both Charging and Discharging Cycles.” Heat Transfer Engineering 44, no. 4 (April 19, 2022): 334–52. https://doi.org/10.1080/01457632.2022.2059216. [SCI-Impact factor 4.56].
13. G, Trilok, Kurma Eshwar Sai Srinivas, Devika Harikrishnan N. Gnanasekaran, and Moghtada Mobedi. “Correlations and Numerical Modeling of Stacked Woven Wire-Mesh Porous Media for Heat Exchange Applications.” Energies 15, no. 7 (March 24, 2022): 2371. https://doi.org/10.3390/en15072371. [SCI-Impact factor 3.252].
14. G, Trilok, K. Kiran Kumar, N. Gnanasekaran, and Moghtada Mobedi. “Numerical Assessment of Thermal Characteristics of Metal Foams of Orderly Varied Pore Density and Porosity under Different Convection Regimes.” International Journal of Thermal Sciences 172 (February 2022): 107288. https://doi.org/10.1016/j.ijthermalsci.2021.107288. [SCI-Impact factor 4.779].
15. Jadhav, Prakash H., Trilok G, N. Gnanasekaran, and Moghtada Mobedi. “Performance Score Based Multi-Objective Optimization for Thermal Design of Partially Filled High Porosity Metal Foam Pipes under Forced Convection.” International Journal of Heat and Mass Transfer 182 (January 2022): 121911. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121911. [SCI-Impact factor 5.431].
16. Narendran, G., Amit Kumar, N. Gnanasekaran, and D. Arumuga Perumal. “A Numerical Study on Microgap-Based Focal Brain Cooling Device to Mitigate Hotspot for the Treatment of Epileptic Seizure.” ASME Open Journal of Engineering 1 (January 1, 2022). https://doi.org/10.1115/1.4055465.
17. G, Trilok, N. Gnanasekaran, and Moghtada Mobedi. “Various Trade-Off Scenarios in Thermo-Hydrodynamic Performance of Metal Foams Due to Variations in Their Thickness and Structural Conditions.” Energies 14, no. 24 (December 10, 2021): 8343. https://doi.org/10.3390/en14248343. [SCI-Impact factor 3.252].
18. Kotresha, Banjara, and N. Gnanasekaran. “A Parametric Study on Mixed Convection in a Vertical Channel in the Presence of Wire Mesh.” Heat Transfer Engineering 42, no. 22 (September 23, 2021): 1914–25. https://doi.org/10.1080/01457632.2020.1834212. [SCI-Impact factor 2.431].
19. Jadhav, Prakash H., N. Gnanasekaran, D. Arumuga Perumal, and Moghtada Mobedi. “Performance Evaluation of Partially Filled High Porosity Metal Foam Configurations in a Pipe.” Applied Thermal Engineering 194 (July 2021): 117081. https://doi.org/10.1016/j.applthermaleng.2021.117081. . [SCI-Impact factor 6.465].
20. Jadhav, Prakash H., and N. Gnanasekaran. “Optimum Design of Heat Exchanging Device for Efficient Heat Absorption Using High Porosity Metal Foams.” International Communications in Heat and Mass Transfer 126 (July 2021): 105475. https://doi.org/10.1016/j.icheatmasstransfer.2021.105475. [SCI-Impact factor 6.782].
21. Jadhav, Prakash H., N. Gnanasekaran, and D. Arumuga Perumal. “Conjugate Heat Transfer Study Comprising the Effect of Thermal Conductivity and Irreversibility in a Pipe Filled with Metallic Foams.” Heat and Mass Transfer 57, no. 6 (June 2021): 911–30. https://doi.org/10.1007/s00231-020-03000-x. [SCI-Impact factor 2.325].
22. Jadhav, Prakash H., N. Gnanasekaran, and D. Arumuga Perumal. “Numerical Consideration of LTNE and Darcy Extended Forchheimer Models for the Analysis of Forced Convection in a Horizontal Pipe in the Presence of Metal Foam.” Journal of Heat Transfer 143, no. 1 (November 5, 2020). https://doi.org/10.1115/1.4048622. [SCI-Impact factor 1.855].
23. Banjara, Kotresha, and N. Gnanasekaran. “Nuances of Fluid Flow through a Vertical Channel in the Presence of Metal Foam/Solid Block – A Hydrodynamic Analysis Using CFD.” Thermal Science and Engineering Progress 20 (December 2020): 100749. https://doi.org/10.1016/j.tsep.2020.100749. [SCI-Impact factor 4.56].
24. Kumar, M K Harsha, P S Vishweshwara, and N. Gnanasekaran. “Evaluation of Artificial Neural Network in Data Reduction for a Natural Convection Conjugate Heat Transfer Problem in an Inverse Approach: Experiments Combined with CFD Solutions.” Sādhanā 45, no. 1 (March 27, 2020). https://doi.org/10.1007/s12046-020-1303-x. [SCI-Impact factor 1.214].
25. Narendran, Ganesan, N. Gnanasekaran, and Dharmaraj Arumuga Perumal. “Experimental Investigation on Heat Spreader Integrated Microchannel Using Graphene Oxide Nanofluid.” Heat Transfer Engineering 41, no. 14 (August 05, 2020): 1252–74. https://doi.org/10.1080/01457632.2019.1637136. [SCI-Impact factor 2.341].
26. Kotresha, Banjara, N. Gnanasekaran, and Chakravarthy Balaji. “Numerical Simulations of Flow-Assisted Mixed Convection in a Vertical Channel Filled with High Porosity Metal Foams.” Heat Transfer Engineering 41, no. 8 (April 27, 2020): 739–50. https://doi.org/10.1080/01457632.2018.1564208. [SCI-Impact factor 2.341].
27. Narendran, G., N. Gnanasekaran, and D. Arumuga Perumal. “Thermodynamic Irreversibility and Conjugate Effects of Integrated Microchannel Cooling Device Using TiO2 Nanofluid.” Heat and Mass Transfer 56, no. 2 (February, 2020): 489–505. https://doi.org/10.1007/s00231-019-02704-z. [SCI-Impact factor 2.325].
28. Jadhav, Prakash H., N. Gnanasekaran, and D. Arumuga Perumal. “Numerical Consideration of LTNE and Darcy Extended Forchheimer Models for the Analysis of Forced Convection in a Horizontal Pipe in the Presence of Metal Foam.” Journal of Heat Transfer 143, no. 1 (November 5, 2020). https://doi.org/10.1115/1.4048622. [SCI-Impact factor 1.855].
29. G, Trilok, and N. Gnanasekaran. “Numerical Study on Maximizing Heat Transfer and Minimizing Flow Resistance Behavior of Metal Foams Owing to Their Structural Properties.” International Journal of Thermal Sciences 159 (2020): 106617. https://doi.org/10.1016/j.ijthermalsci.2020.106617. [SCI-Impact factor 4.779].
30. Vishweshwara, P. S., N. Gnanasekaran, and M. Arun. “Inverse Approach Using Bio-Inspired Algorithm Within Bayesian Framework for the Estimation of Heat Transfer Coefficients During Solidification of Casting.” Journal of Heat Transfer 142, no. 1 (January 1, 2020). https://doi.org/10.1115/1.4045134. [SCI-Impact factor 1.855].
31. Nakate, Prasheel, Banjara Kotresha, and N. Gnanasekaran. “Inexpensive Computations Using Computational Fluid Dynamics Combined With Asymptotics Applied to Laminar Mixed Convection in a Vertical Channel.” Journal of Heat Transfer 141, no. 12 (October 8, 2019). https://doi.org/10.1115/1.4044698. [SCI-Impact factor 1.855].
32. P.S., Vishweshwara, Harsha Kumar M.K., N. Gnanasekaran, and Arun M. “3D Coupled Conduction-Convection Problem Using in-House Heat Transfer Experiments in Conjunction with Hybrid Inverse Approach.” Engineering Computations 36, no. 9 (November 11, 2019): 3180–3207. https://doi.org/10.1108/ec-11-2018-0496. [SCI-Impact factor 1.675].
33. Vishweshwara, P S, N. Gnanasekaran, and M Arun. “Simultaneous Estimation of Unknown Parameters Using A-Priori Knowledge for the Estimation of Interfacial Heat Transfer Coefficient during Solidification of Sn–5wt%Pb Alloy—an ANN-Driven Bayesian Approach.” Sādhanā 44, no. 4 (March 30, 2019). https://doi.org/10.1007/s12046-019-1076-2. [SCI-Impact factor 1.214].
34. Kotresha, Banjara, and N. Gnanasekaran. “Determination of Interfacial Heat Transfer Coefficient for the Flow Assisted Mixed Convection through Brass Wire Mesh.” International Journal of Thermal Sciences 138 (April 2019): 98–108. https://doi.org/10.1016/j.ijthermalsci.2018.12.043. [SCI-Impact factor 4.779].
35. Kotresha, Banjara, and N. Gnanasekaran. “A Synergistic Combination of Thermal Models for Optimal Temperature Distribution of Discrete Sources Through Metal Foams in a Vertical Channel.” Journal of Heat Transfer 141, no. 2 (January 02, 2019). https://doi.org/10.1115/1.4041955. . [SCI-Impact factor 1.855].
36. Kotresha, Banjara, and N. Gnanasekaran. “Numerical Simulations of Fluid Flow and Heat Transfer through Aluminum and Copper Metal Foam Heat Exchanger – A Comparative Study.” Heat Transfer Engineering 41, no. 6–7 (January 19, 2019): 637–49. https://doi.org/10.1080/01457632.2018.1546969. [SCI-Impact factor 2.431].
37. Vishweshwara, P S, N. Gnanasekaran, and M Arun. “Simultaneous Estimation of Unknown Parameters Using A-Priori Knowledge for the Estimation of Interfacial Heat Transfer Coefficient during Solidification of Sn–5wt%Pb Alloy—an ANN-Driven Bayesian Approach.” Sādhanā 44, no. 4 (March 30, 2019). https://doi.org/10.1007/s12046-019-1076-2. . [SCI-Impact factor 1.214].
38. Kotresha, Banjara, and N. Gnanasekaran. “Effect of Thickness and Thermal Conductivity of Metal Foams Filled in a Vertical Channel – a Numerical Study.” International Journal of Numerical Methods for Heat & Fluid Flow 29, no. 1 (January 7, 2019): 184–203. https://doi.org/10.1108/hff-11-2017-0465. . [SCI-Impact factor 5.181].
39. Kotresha, Banjara, and N. Gnanasekaran. “Comparison of Fluid Flow and Heat Transfer Through Metal Foams and Wire Mesh by Using CFD.” Recent Patents on Mechanical Engineering 12, no. 3 (September 26, 2019): 220–26. https://doi.org/10.2174/2212797612666190717163207. [Impact factor 0.166].
40. Prakash H Jadhav, N. Gnanasekaran, & D Arumuga Perumal. 2019. A Computational Assessment of Different Materials and Variations in Thickness Ratio of Solid Blocks in a Square Cavity – A Conjugate Heat Transfer Analysis. International Journal of Advanced Trends in Computer Applications, 126–130(2395–3519). Published. [Impact factor 5.966].
41. Karthik K Y, Kishan Naik, Banjara Kotresha, & N. Gnanasekaran. 2019. Effect of Length Ratio on Heat Transfer through Discrete Heaters in a Vertical Channel. International Journal of Advanced Trends in Computer Applications, 14–18(2395–3519). Published. . [Impact factor 5.966].
42. Hasavimath Kartikaswami, Kishan Naik, Banjara Kotresha, and N. Gnanasekaran. “Forced Convection through Discrete Heat Sources and Simple Thermal Model – A Numerical Study.” International Journal of Mathematical, Engineering and Management Sciences 4, no. 6 (December 1, 2019): 1397–1406. https://doi.org/10.33889/ijmems.2019.4.6-110. [Impact factor 0.332].
43. Kotresha, Banjara, and N. Gnanasekaran. “Investigation of Mixed Convection Heat Transfer Through Metal Foams Partially Filled in a Vertical Channel by Using Computational Fluid Dynamics.” Journal of Heat Transfer 140, no. 11 (July 23, 2018). https://doi.org/10.1115/1.4040614. . [SCI-Impact factor 1.855].
44. M K, Harsha Kumar, Vishweshwara P S, N. Gnanasekaran, and Balaji C. “A Combined ANN-GA and Experimental Based Technique for the Estimation of the Unknown Heat Flux for a Conjugate Heat Transfer Problem.” Heat and Mass Transfer 54, no. 11 (May 1, 2018): 3185–97. https://doi.org/10.1007/s00231-018-2341-3. [SCI-Impact factor 2.325].
45. N. Gnanasekaran, and S Balaji. “Inverse Approach for Estimating Boundary Properties in a Transient Fin Problem.” Sādhanā 43, no. 7 (June 22, 2018). https://doi.org/10.1007/s12046-018-0895-x. [SCI-Impact factor 1.214].
46. Narendran, Ganesan, N. Gnanasekaran, and Dharmaraj A. Perumal. “A Review on Recent Advances in Microchannel Heat Sink Configurations.” Recent Patents on Mechanical Engineering 11, no. 3 (September 10, 2018): 190–215. https://doi.org/10.2174/2212797611666180726124047. [Impact factor 0.166].
47. Kumar, Harsha, and N. Gnanasekaran. “A Synergistic Combination of Asymptotic Computational Fluid Dynamics and ANN for the Estimation of Unknown Heat Flux from Fin Heat Transfer.” Alexandria Engineering Journal 57, no. 2 (June 2018): 555–64. https://doi.org/10.1016/j.aej.2017.01.034. [SCI-Impact factor 6.626].
48. Kumar, Harsha, and N. Gnanasekaran. “A Bayesian Inference Approach: Estimation of Heat Flux from Fin for Perturbed Temperature Data.” Sādhanā 43, no. 4 (April 2018). https://doi.org/10.1007/s12046-018-0861-7. [SCI-Impact factor 1.214].
49. Kumar, Harsha, Sharath Kumar, N. Gnanasekaran, and Chakravarthy Balaji. “A Markov Chain Monte Carlo-Metropolis Hastings Approach for the Simultaneous Estimation of Heat Generation and Heat Transfer Coefficient from a Teflon Cylinder.” Heat Transfer Engineering 39, no. 4 (February 25, 2018): 339–52. https://doi.org/10.1080/01457632.2017.1305823. [SCI-Impact factor 2.431].
50. Bhargav Sriram, S., S. Sravan, and N. Gnanasekaran. “Numerical Estimation of Heat Flux and Convective Heat Transfer Coefficient in a One Dimensional Rectangular Plate by Levenberg-Marquardt Method.” Indian Journal of Science and Technology 9, no. 45 (December 20, 2016). https://doi.org/10.17485/ijst/2016/v9i45/104628. [Impact factor 0.159].
51. Sai Krishna, Dammalapati, Murmu Vishal, and N. Gnanasekaran. “Bayesian Inference Approach to Estimate Robin Coefficient Using Hybrid Monte Carlo Algorithm.” Indian Journal of Science and Technology 9, no. 45 (December 19, 2016). https://doi.org/10.17485/ijst/2016/v9i45/104584. [Impact factor 0.159].
52. N. Gnanasekaran, Nagarajan, Sharath Kumar, and Harsha Kumar. “A NEURAL NETWORK BASED METHOD FOR ESTIMATION OF HEAT GENERATION FROM A TEFLON CYLINDER.” Frontiers in Heat and Mass Transfer 7 (July 18, 2016). https://doi.org/10.5098/hmt.7.15. [Impact factor 0.439].
53. Sai Krishna, Dammalapati, Murmu Vishal, and N. Gnanasekaran. “Bayesian Inference Approach to Estimate Robin Coefficient Using Hybrid Monte Carlo Algorithm.” Indian Journal of Science and Technology 9, no. 45 (December 19, 2016). https://doi.org/10.17485/ijst/2016/v9i45/104584. [Impact factor 0.159]
54. N. Gnanasekaran., and C. Balaji. “Markov Chain Monte Carlo (MCMC) Approach for the Determination of Thermal Diffusivity Using Transient Fin Heat Transfer Experiments.” International Journal of Thermal Sciences 63 (January 2013): 46–54. https://doi.org/10.1016/j.ijthermalsci.2012.07.005. [SCI-Impact factor 4.779].
55. N. Gnanasekaran., and C. Balaji. “A Bayesian Approach for the Simultaneous Estimation of Surface Heat Transfer Coefficient and Thermal Conductivity from Steady State Experiments on Fins.” International Journal of Heat and Mass Transfer 54, no. 13–14 (June 2011): 3060–68. https://doi.org/10.1016/j.ijheatmasstransfer.2011.01.028. [SCI-Impact factor 5.341].
56. N. Gnanasekaran., and C. Balaji. “An Inexpensive Technique to Simultaneously Determine Total Emissivity and Natural Convection Heat Transfer Coefficient from Transient Experiments.” Experimental Heat Transfer 23, no. 3 (June 17, 2010): 235–58. https://doi.org/10.1080/08916150903564788. [SCI-Impact factor 3.272].
57. Balaji, C., and N. Gnanasekaran. “A CORRELATION FOR NUSSELT NUMBER UNDER TURBULENT MIXED CONVECTION USING TRANSIENT HEAT TRANSFER EXPERIMENTS.” Frontiers in Heat and Mass Transfer 2, no. 2 (January 1 20, 2010). https://doi.org/10.5098/hmt.v2.2.3008. [Impact factor 0.439]

Achievements

1. MHRD scholarship for pursuing Ph.D (IIT Madras) 2008-2012.
2. 2012 Senior Research Fellow (CSIR) IIT Madras & CSIR
3. Editorial Board Member in International Journal of Scientific Research and Mechanical Engineering.
4. Best paper award for the project titled “Numerical Estimation of Wall Heat Flux in a One Dimensional Rectangular Fin by Conjugate Gradient Method”, International Conference on Systems, Energy and Environment held at Government College of Engineering Kannur during 5-6 August 2016.

Remarks
 

Contact us

Dr. S M Murigendrappa

Professor and Head,

Department of Mechanical Engineering,

National Institute of Technology Karnataka (NITK),

Surathkal

P. O. Srinivasnagar, Mangaluru - 575 025 Karnataka, India.

  • Phone No. (O): +91-0824-2473049

Connect with us

We're on Social Networks. Follow us & get in touch.